Round Frequency Panel Meter Moving Coil Structure 110*110mm Zero Screw Adjust
1. Product Introduction:
This type of meters are analog electric measuring instruments, widely used for measuring AC/DC current, voltage, frequency, power,power factor, insulation resistance and synchronous indicating in AC/DC transmitting & distributing power system, switchboard, other electric & non-electric instruments.
Our 96*96mm & 72*72mm squre meter, and 110*110mm, 80*80mm are round type meter improved in structure, material, seals according to environmental conditions & demands in marine industry, which let our meter have the ability of not only advanced technology, reasonable structure, good quality, but also good appearance, light weight, anti-mechanical force and different climate.
2. Technical Parameters:
| Item | Technical Data | Standards |
| Technical Standard | GB/T7676-1998 | IEC60092-50 |
| Environmental Standard | GB8355-1987 | IEC92-504-74 |
| Safety Standard | GB4793-20 | IEC61010 |
| Working Temperature | -40-65℃ | |
| Temperature Infulence | -13-33℃, 100% comply with accuracy class | |
| Indicating Angle | 240°-270º (Synchroscope meter: 360º) | |
| Color of Shell | Black/white,board frame, terminal plate: black | |
| Color of Dial Plate | Black/white(other colors are available) | |
| Mounting | Vertical Installation | |
| Dimension | 110*110mm, 80*80mm | |
| 96*96mm, 72*72mm, 48*48mm | |
| Overshoot | Less than 20% when scale reaches to 2/3 | |
| Insulation Withstand | Circuit& shell: AC2600V/1 min(Water area) | |
| Vibration Resistance | 24.5m/s2 | |
| Impact Resistance | 147m/s2 | |
| Material | Shell/terminal board: ABS; Cover: Transparent Glass |
3. Main Features:
1). Usage: Marine application
2). Indicating Angle:240°
3). Measurement: Frequency in power system
4). Measuring Range:45-55Hz, 55-65Hz, 45-65Hz,350-450Hz
5). Connection Way: 100V, 220V,380V,400V,440V,690V;
6). Mounting: Vertical installation;
7). Dimension(mm): 110*110mm
8). Hole Size: 68*68mm
4. Typical Wiring Diagram:
5. Installation:
Unless specified, the meter is usually installed in a vertical position. Other installation positions such as horizontal and inclined position can be installed according to the customer’s requirements. The corresponding level of accuracy is only valid to the regulated installation position. The meter has two kinds of instruction angles: right angle 90°and wide angle 240°.
6. Certificates:
Product Tags:
|
|
Round Frequency Panel Meter Moving Coil Structure 110*110mm Zero Screw Adjust Images
|
